How to install PowerClean™ cordless vacuum cleaner

How to install your new PowerClean™ cordless vacuum cleaner- step-by-step

We’ve put together this handy how-to guide to show you how to unpack and install your new Beko PowerClean™ cordless vacuum cleaner for the first time. Simply watch the video, or follow the steps below to find out how set up your new vacuum cleaner.

Installing your new Beko PowerClean™ vacuum cleaner

Remember to read all instructions in the user manual before installation.

  1. When your new Beko PowerClean™ vacuum cleaner arrives, carefully remove all parts from the packaging and use the user manual to check that you have all the parts and attachments.
  2. To build the charging station, simply slot parts 12, 13 and 14 into each other if you intend to use the floor standing charging station. If you are mounting on the wall you only need part 12.*
  3. Next, plug part 16 into a power source, making sure that the power source is close to where you intend to hang your charging station. Please switch off the power source until the appliance is fully fitted.
  4. Plug the opposite end of part 16 into the back of part 12.

To mount your appliance on the wall, follow these instructions:

  1. You will only need part 12 if you are mounting on the wall (not 13 & 14)
  2. Using a drill, secure the charging station to the wall with the screws provided (part 21 and 22). The charging station will use between 102-104cm of wall space.
  3. Once secured, assemble your Beko PowerClean™ vacuum cleaner. Simply slot parts 6, 11 and 9 together.
  4. Slot the assembled PowerClean™ onto the mounted charging station.
  5. Turn on the power source and wait for the machine to fully charge. This should take between 4 and 5 hours.
  6. Once charged, your Beko PowerClean™ vacuum cleaner is ready for use.

Alternatively, to install your appliance on a floor standing station, follow the below instructions:

  1. Assemble your Beko PowerClean™ vacuum cleaner. Simply slot parts 6, 11 and 9 together.
  2. Slot the assembled PowerClean™ vacuum cleaner onto the mounted charging station.
  3. Turn on the power source and wait for the machine to fully charge. This should take between 4 and 5 hours.
  4. Once charged, your Beko PowerClean™ vacuum cleaner is ready for use.

*All numbers and their corresponding parts can be found in your user manual. 

Need Product Support?

If you have any questions about your Beko appliance, we are here to help. Finding answers and information is easy with Beko’s helpful online resources, simply browse our product support topics below and select the one that is relevant to you.

Manuials icon

Manuals

Beko manuals contain helpful information and advice about your appliance.

View Manuals
Register Icon

Product Registration

We can quickly contact you for an important product update or service repairs.

Register Appliance
Writing Icon

FAQs

Browse the most asked questions about our product range.

Search FAQs
How-to Icon

How-to Videos

Helpful how-to videos on our appliances.

View How-Tos