How to reverse your tumble dryer door (Beko Beyond style door)

Here’s how to reverse the Beko Beyond-style tumble dryer door:

1. Remove the two screws holding the door hinge to the tumble dryer and carefully remove the door.
2. Place the door glass side down onto a flat surface. Ideally, place a towel underneath it to stop any scratches occurring.
3. Once the door is removed, reinsert the two screws back in their original position.
4. Carefully remove the cover on the opposite side of the door.
5. Once the cover is removed, remove the holder and transfer it to the opposite side of the door. The holder is responsible for keeping the door closed.
6. Use the cover from the opposite side to close the repositioned holder.
7. Remove the two screws to prepare the positions of the door.
8. Place the door onto a table before performing the next steps.
9. Remove the single screw on the door next to the hinge.
10. With a small turning force, separate the cover from the outside ring. For a more visual guide, please watch the above YouTube video.
11. Turn the cover 180 degrees and position it back inside the outside ring. Remember to locate the clip on the outside ring before repositioning the cover.
12. To secure the cover, turn with a small force.
13. Insert the single screw next to the hinge.
14. Refit the door in the opposite direction and insert two screws.
15. Please keep in mind that the holder will move from a 10 o’clock position to a 4 o’clock position after the procedure.

* Before purchasing a new Beko tumble dryer, it is important to check whether the doors on the desired model can be reversed. Whilst the doors on certain Beko tumble dryers can be reversed to accommodate your needs, this is not the case for all models.