4.2 out of 5 rating from
over 27262 reviews

A Step-By-Step Guide On How To Install A Tumble Dryer From Beko

Not sure where to start when installing your new Beko tumble dryer? Follow our step-by-step guide to learn how to fully unpack, set up and instal your new Beko tumble dryer.

Caution: If you have purchased a heat pump tumble dryer, you must wait for 12 hours before first starting it.

Remove the transportation safety packaging from your tumble dryer

Open the loading door.
You will find a nylon bag inside the drum that contains a piece of Styrofoam.
Hold the nylon bag from its section marked with "XX XX".
Pull the nylon towards you to remove the transportation safety packaging.
Check that no part of the transportation safety packaging remains inside the drum.

When installing a tumble dryer, ensure it is completely leve

Lean the tumble dryer back to the side to access both the front and back adjustable feet on that side. Be very careful when lifting, tilting or moving your tumble dryer; whenever possible, have someone assist you.
Turn the adjustable feet to the left or right to change their height. Keep doing this until your tumble dryer stands completely level and does not move around when gently rocked.

Connect the direct drainage hose (Optional)

Pull the direct drainage hose, which is located behind the tumble dryer, by hand to disconnect it from where it is connected. Do not use any tools to remove the hose.
Connect one end of the separate drain hose supplied with the dryer to the connection point from where you removed the hose of the product in the previous step.
Connect the other end of the drain hose directly to the wastewater drain.
The maximum height of the drain needs to be 80 cm.
Ensure the direct drainage hose is not tangled or kinked once installed and make sure you do not step on the hose.

Check your electrical connection

Do not plug your tumble dryer into an extension socket, only ever plug the appliance into a mains wall socket.
Test that the power socket is working by plugging in something you know is working. A light, for example.
Once you have ensured the socket is operational, you can plug your tumble dryer in.

If you have any further questions about your Beko tumble dryer, we are here to help.

Learn how to reverse the door on a Beko tumble dryer with our expert guides.

Did you find this How-To guide useful?

Thank you for your feedback

Thank you for your feedback and we are sorry this How-To Guide wasn’t useful to you. If you would like further assistance, please head over to our Contact Us page.

Need Product Support?

If you have any questions about your Beko appliance, we are here to help. Finding answers and information is easy with Beko’s helpful online resources, simply browse our product support topics below and select the one that is relevant to you.

A Step-By-Step Guide On How To Install A Tumble Dryer From Beko

Remove the transportation safety packaging from your tumble dryer

When installing a tumble dryer, ensure it is completely leve

Connect the direct drainage hose (Optional)

Check your electrical connection

Need Product Support?

Manuals

Parts & Accessories

FAQs

Repairs